|
|
|
Hitec HS-45HB Servo
Hitec's HS-45HB a ball bearing supported output shaft and Karbonite gears.
Specifications:
Gear Type: Karbonite
Motor Type: 3 Pole
Bearing Type: Top Ball Bearing
Speed (4.8V/6.0V): 0.14 / 0.12 sec @ 60 deg.
Torque oz./in. (4.8V/6.0V): 14 / 17
Torque kg./cm. (4.8V/6.0V): 1.0 / 1.2
Size in Inches: 0.92 x 0.38 x 0.88
Size in Millimeters: 23.37 x 9.65 x 22.35
Weight ounces: 0.28
Weight grams: 7.94
Advanced Servo Specifications:
Control System: +Pulse Width Control 1500usec Neutral
Operating Voltage Range: 4.8V
Operating Temperature Range: -20C to +60C (-4F to +140F)
Idle Current: 8mA
No Load Running Current (4.8V/6.0V): 100mA/60 deg
Stall Current (4.8V/6.0V): 440mA
Dead Band Width: 5usec
Potentiometer Type: 2 Slider/Direct Drive
Connector Wire Length: 250mm (9.84 in)
Connector Wire Gauge: 28AWG
SKU Number: * |
|
|
|
|
|
|
|
|
Hitec HS-55 Servo
The HS-55 set the standard for affordable performance, offering precision components that have been engineered to provide long lasting trouble free service! Featured in a hundred model aircraft reviews worldwide, the HS-55 is your best choice when it comes to controlling smaller Electric's and Park Flyers.
Specifications:
Gear Type: Nylon
Motor Type: Coreless
Bearing Type: None
Speed (4.8V/6.0V): 0.17 / 0.14 sec @ 60 deg.
Torque oz./in. (4.8V/6.0V): 15 / 18
Torque kg./cm. (4.8V/6.0V): 1.08 / 1.30
Size in Inches: 0.89 x 0.45 x 0.94
Size in Millimeters: 22.61 x 11.43 x 23.88
Weight ounces: 0.28
Weight grams: 7.94
SKU Number: * |
|
|
|
|
|
|
|
|
Hitec HS-50 Servo
The HS-50, Super Feather Servo is a modern miracle of miniaturization. Featuring precision components that have been engineered to provide long lasting trouble free service, the HS-50 is the perfect choice for any micro application from indoor R/C and hand launch gliders to ultra small electric park and yard flyers.
Specifications:
Gear Type: Nylon
Motor Type: 3 Pole
Bearing Type: None
Speed (4.8V/6.0V): 0.09 / NA @ 60 deg.
Torque oz./in. (4.8V/6.0V): 8 / NA
Torque kg./cm. (4.8V/6.0V): 0.58 / NA
Size in Inches: 0.82 x 0.44 x 0.86
Size in Millimeters: 20.83 x 11.18 x 21.84
Weight ounces: 0.21
Weight grams: 5.95
SKU Number: * |
|
|
|
|
|
|
|
|
Hitec HS-56HB Servo
The HS-56HB Feather Servo is the perfect choice for larger indoor R/C, hand launch gliders, small electric Park flyers, and can handle the duties of smaller electric 3D aerobatic aircraft as well. With Hitec’s revolutionary Karbonite gear train, these gears are four times stronger than our standard white nylon gears and even after hundreds of thousands of cycles it will not show any signs of wear. Combined with precision components that have been engineered to provide long lasting trouble free service, the HS-56HB sets a standard for heavy duty ultra micro servos.
Specifications:
Gear Type: Karbonite
Motor Type: 3 Pole
Bearing Type: Top Ball Bearing
Speed (4.8V/6.0V): 0.12 / 0.10 sec @ 60 deg.
Torque oz./in. (4.8V/6.0V): 16 / 19
Torque kg./cm. (4.8V/6.0V): 1.2 / 1.4
Size in Inches: 0.88 x 0.45 x 0.94
Size in Millimeters: 22.35 x 11.43 x 23.88
Weight ounces: 0.39
Weight grams: 11.06
SKU Number: * |
|
|
|
|
|
|
|
|
Hitec HS-65HB Servo
Considered one of the most powerful servos in the micro class, the HS-65 is constructed with "zero wear" Karbonite gears and features a top-ball bearing for long life and positive centering, 31 ounces/inches of power at 6 volts and is an excellent choice for higher performance micro helicopters, electric park flyers, and 1/18 scale cars.
Specifications:
Gear Type: Karbonite
Motor Type: 3 Pole
Bearing Type: Top Ball Bearing
Speed (4.8V/6.0V): 0.14 / 0.11 sec @ 60 deg.
Torque oz./in. (4.8V/6.0V): 25 / 31
Torque kg./cm. (4.8V/6.0V): 1.8 / 2.2
Size in Inches: 0.92 x 0.45 x 0.94
Size in Millimeters: 23.34 x 11.43 x 23.88
Weight ounces: 0.39
Weight grams: 11.06
SKU Number: * |
|
|
|
|
|
|
|
|
Hitec HS-65MG Servo
Considered one of the most powerful servos in the micro class, The 65MG series features metal gears and a top-ball bearing for long life and positive centering, 31 ounces/inches of power at 6 volts and is an excellent choice for higher performance micro helicopters, electric park flyers, and 1/18 scale cars.
Specifications:
Gear Type: Metal
Motor Type: 3 Pole
Bearing Type: Top Ball Bearing
Speed (4.8V/6.0V): 0.14 / 0.11 sec @ 60 deg.
Torque oz./in. (4.8V/6.0V): 25 / 31
Torque kg./cm. (4.8V/6.0V): 1.8 / 2.2
Size in Inches: 0.92 x 0.45 x 0.94
Size in Millimeters: 23.37 x 11.43 x 23.88
Weight ounces: 0.44
Weight grams: 12.47
SKU Number: * |
|
|
|
|
|
|
|
|
Hitec HS-81 Servo
A popular servo for smaller airplanes, heli’s, boats, cars and trucks, the HS-81 offers a fine balance between speed and torque.
Specifications:
Gear Type: Nylon
Motor Type: 3 Pole
Bearing Type: None
Speed (4.8V/6.0V): 0.11 / 0.09 sec @ 60 deg.
Torque oz./in. (4.8V/6.0V): 36 / 42
Torque kg./cm. (4.8V/6.0V): 2.6 / 3.0
Size in Inches: 1.17 x 0.47 x 1.16
Size in Millimeters: 29.72 x 11.94 x 29.46
Weight ounces: 0.58
Weight grams: 16.44
SKU Number: * |
|
|
|
|
|
|
|
|
Hitec HS-85MG Servo
The HS-85MG features a high power motor for greater speed and torque. The HS-85MG is the choice of modelers looking for a high performance servo without breaking the bank. The ball bearing supported output shaft and sturdy gear trains are preferred for smaller glow and electric airplanes, heli's and sail planes.
Specifications:
Gear Type: Metal
Motor Type: 3 Pole
Bearing Type: Top Ball Bearing
Speed (4.8V/6.0V): 0.16 / 0.14 sec @ 60 deg.
Torque oz./in. (4.8V/6.0V): 42 / 49
Torque kg./cm. (4.8V/6.0V): 3.0 / 3.5
Size in Inches: 1.14 x 0.51 x 1.18
Size in Millimeters: 28.96 x 12.95 x 29.97
Weight ounces: 0.77
Weight grams: 21.83
SKU Number: * |
|
|
|
|
|
|
|
|
Hitec HS-125MG Slim Servo
The analog HS-125MG is truly a super thin servo measuring 1.2" x 0.4" x 1.3". Featuring Hitec's MG Gear, the HS-125MG is very durable, and a perfect fit in the slim wings of today's high performance gliders.
Specifications:
Gear Type: Metal
Motor Type: 3 Pole
Bearing Type: Dual Ball Bearing
Speed (4.8V/6.0V): 0.17 / 0.13 sec @ 60 deg.
Torque oz./in. (4.8V/6.0V): 42 / 49
Torque kg./cm. (4.8V/6.0V): 3.0 / 3.5
Size in Inches: 1.18 x 0.39 x 1.33
Size in Millimeters: 29.97 x 9.91 x 33.78
Weight ounces: 0.84
Weight grams: 23.81
SKU Number: * |
|
|
|
|
|
|
|
|
Hitec HS-225BB Servo
The analog HS-225BB represents a good value with performance that rivals other larger and more expensive servos. Ideal for applications that call for a small, lightweight, high speed, high torque servo, the HS-225BB high performance mini servo features a top ball bearing and is built with state-of-the-art SMT technology.
Specifications:
Gear Type: Nylon
Motor Type: 3 Pole <
Bearing Type: Top Ball Bearing
Speed (4.8V/6.0V): 0.14 / 0.11 sec @ 60 deg.
Torque oz./in. (4.8V/6.0V): 54 / 67
Torque kg./cm. (4.8V/6.0V): 3.9 / 4.8
Size in Inches: 1.27 x 0.66 x 1.22
Size in Millimeters: 32.26 x 16.76 x 31.00
Weight ounces: 0.95
Weight grams: 26.93
SKU Number: * |
|
|
|
|
|
|
|
|
Hitec HS-225MG Servo
The analog HS-225MG represents a good value with performance that rivals other larger and more expensive servos. Ideal for applications that call for a small, lightweight, high speed, high torque servo, the HS-225MG high performance metal gear mini servo features a top ball bearing and is built with state-of-the-art SMT technology.
Specifications:
Gear Type: Metal
Motor Type: 3 Pole
Bearing Type: Top Ball Bearing
Speed (6.0V/7.4V): 0.14 x 0.11 sec @ 60 deg.
Torque oz./in. (6.0V/7.4V): 54 / 67
Torque kg./cm. (6.0V/7.4V): 3.9 / 4.8
Size in Inches: 1.27 x 0.66 x 1.22
Size in Millimeters: 32.26 x 16.76 x 31.00
Weight oz.: 1.10
Weight g.: 27.94
SKU Number: * |
|
|
|
|
|
|
|
|
Hitec HS-75BB Retract Servo
With its low profile design, strong torque and precision movement, the HS-75BB is a great choice to move your retract gear in a realistic manner that you need. Note, this is a retract or "bang bang" servo and only travels from one end to the other (180 degrees). If you require a proportional servo this size, use the Hitec HS-77BB.
Specifications:
Gear Type: Nylon
Motor Type: 3 Pole
Bearing Type: Top Ball Bearing
Speed (4.8V/6.0V): 0.45 / 0.34 sec @ 180 deg.
Torque oz./in. (4.8V/6.0V): 92 / 114
Torque kg./cm. (4.8V/6.0V): 6.6 / 8.2
Size in Inches: 1.73 x 0.90 x 0.98
Size in Millimeters: 43.94 x 22.86 x 24.89
Weight ounces: 1.23
Weight grams: 34.87
SKU Number: * |
|
|
|
|
|
|
|
|
Hitec HS-77BB Low Profile Servo
With its low profile design and strong standing torque, the HS-77BB is a great choice for wing or tail mounting in aircrafts up to 1.20 size. Submarines, boats, cars and trucks can also benefit from this servo's strength and compact size.
Specifications:
Gear Type: Nylon
Motor Type: 3 Pole
Bearing Type: Top Ball Bearing
Speed (4.8V/6.0V): 0.18 / 0.14 sec @ 60 deg.
Torque oz./in. (4.8V/6.0V): 61 / 76
Torque kg./cm. (4.8V/6.0V): 4.4 / 5.5
Size in Inches: 1.73 x 0.90 x 0.98
Size in Millimeters: 43.94 x 22.86 x 24.89
Weight ounces: 1.23
Weight grams: 34.87
SKU Number: * |
|
|
|
|
|
|
|
|
Hitec HS-311 Servo
The HS-311 sport servo provides the novice modeler all the performance and reliability you would expect to find in a more expensive servo. Combined with precise resin gears and SMT circuitry, the HS-311 represents a remarkable value in today's R/C market.
Specifications:
Gear Type: Nylon
Motor Type: 3 Pole
Bearing Type: None
Speed (4.8V/6.0V): 0.19 / 0.15 sec @ 60 deg.
Torque oz./in. (4.8V/6.0V): 42 / 51
Torque kg./cm. (4.8V/6.0V): 3.0 / 3.7
Size in Inches: 1.57 x 0.78 x 1.43
Size in Millimeters: 39.88 x 19.81 x 36.32
Weight ounces: 1.51
Weight grams: 42.81
SKU Number: * |
|
|
|
|
|
|
|
|
Hitec HS-322HD Servo
The HS-322HD Standard Heavy Duty Servo utilizes Hitec's revolutionary Karbonite gear train which is four times stronger than our standard white nylon gears, and even after hundreds of thousands of cycles they don't show any signs of wear. Karbonite gears and our custom IC make the HS-322HD a great choice for an economical sport servo.
Applications: Heli's and Aircraft up to 72" or up to 12lbs when using just one servo per control surface.
Note: Be aware that high vibration gas (not glow) engines combined with large control surfaces and large throws (3D models) can put undue strain on the gears. Metal geared servos are recommended for these applications, even if under 12lbs.
Warning: Do not use thread lockers on Karbonite geared servo as it will cause the output shaft to fail.
Specifications:
Gear Type: Karbonite
Motor Type: 3 Pole
Bearing Type: Nylon
Speed (4.8V/6.0V): 0.19 / 0.15 sec @ 60 deg.
Torque oz./in. (4.8V/6.0V): 42 / 51
Torque kg./cm. (4.8V/6.0V): 3.0 / 3.7
Size in Inches: 1.57 x 0.78 x 1.43
Size in Millimeters: 39.88 x 19.81 x 36.32
Weight ounces: 1.51
Weight grams: 42.81
SKU Number: * |
|
|
|
|
|
|
|
|
Hitec HS-325HB Servo
The HS-325HB Standard Heavy Duty Servo features a ball bearing output shaft for long life and positive centering. Hitec's HS-325HB is offered with Karbonite gears, that after hundreds of thousands of cycles won't show any signs of wear. With 49 oz./in. of torque at 6 Volts, the HS-325HB is a great choice for Sport pilots all over the World!
Applications: Heli's and Aircraft up to 72" or up to 12lbs when using just one servo per control surface.
Note: Be aware that high vibration gas (not glow) engines combined with large contol surfaces and large thows (3D models) can put undue strain on the gears. Metal geared servos are recommended for these applications even if under 12lbs.
Warning: Do not use thread lockers on Karbonite geared servo as it will cause the output shaft to fail.
Specifications:
Gear Type: Karbonite
Motor Type: 3 Pole
Bearing Type: Top Ball Bearing
Speed (4.8V/6.0V): 0.19 / 0.15 sec @ 60 deg.
Torque oz./in. (4.8V/6.0V): 42 / 51
Torque kg./cm. (4.8V/6.0V): 3.0 / 3.7
Size in Inches: 1.57 x 0.78 x 1.43
Size in Millimeters: 39.88 x 19.81 x 36.32
Weight ounces: 1.51
Weight grams: 42.81
SKU Number: * |
|
|
|
|
|
|
|
|
Hitec HS-425BB Servo
The HS-425BB is offered with dual ball bearings, impact resin gears and high performance circuitry. As one of our longest running production servos, it has proven to be a durable and dependable product year after year.
Specifications:
Gear Type: Nylon
Motor Type: 3 Pole
Bearing Type: Dual Ball Bearing
Speed (4.8V/6.0V): 0.21 / 0.16 sec @ 60 deg.
Torque oz./in. (4.8V/6.0V): 46 / 57
Torque kg./cm. (4.8V/6.0V): 3.3 / 4.1
Size in Inches: 1.59 x 0.77 x 1.44
Size in Millimeters: 40.39 x 19.56 x 36.58
Weight ounces: 1.60
Weight grams: 45.36
SKU Number: * |
|
|
|
|
|
|
|
|
Hitec HS-485HB Servo
The HS-485HB updates the very popular HS-475HB by adding more torque and greater speed. With its top ball bearing, heavy duty, high impact Karbonite gears and high performance circuitry, the HS-485HB offers lots of torque and features excellent centering and resolution.
Specifications:
Gear Type: Karbonite
Motor Type: 3 Pole
Bearing Type: Top Ball Bearing
Speed (4.8V/6.0V): 0.20 / 0.17 sec @ 60 deg.
Torque oz./in. (4.8V/6.0V): 72 / 89
Torque kg./cm. (4.8V/6.0V): 5.2 / 6.4
Size in Inches: 1.57 x 0.78 x 1.49
Size in Millimeters: 39.88 x 19.81 x 37.85
Weight ounces: 1.59
Weight grams: 45.08
SKU Number: * |
|
|
|
|
|
