|
|
|
| | |
|
E-Flite 30amp ESC w/switch BEC (3S-4S)
- Up to 30-amp continuous current with proper airflow, 35-amp peak
- 5-volt Switch-Mode BEC circuit capable of 700mAh continuous current on any recommended input voltage
- Drives up to 5 analog or 4 digital sub-micro servos with the BEC
- 3S-4S Li-Po or 9- to 12-cell Ni-MH/Ni-Cd input voltage
- Programmable motor braking
- Safe power-arm mode prevents accidental starts
- Programmable low voltage cut-off with settings for 3S Li-Po (9.2V), 4S Li-Po (12V) or 74% of battery starting voltage
- Programmable soft start for helis and airplanes
- Auto motor shutdown if signal is lost or there is interference
- Programmable timing - 5 user-selectable ranges for use with a larger variety of brushless motors
- Heli mode for starting the motor with a low speed ratio
- Pre-wired connectors - E-flite EC3 connectors on battery input and 3.5mm female gold bullets on motor output leads
E-flite’s 30-amp Pro SB brushless ESC offers up to 30 amps of continuous current with proper airflow and a peak of 35 amps. It drives up to 5 analog or 4 digital sub-micro servos with the BEC on any recommended input voltage. This brushless ESC includes programmable motor braking, soft start for helis and planes, timing, throttle input range, and low-voltage cutoff. It also features auto motor shutdown in case of lost signal or interference. The safe power-arm mode prevents accidental starts. Servo Ratings with BEC Enabled:Drives up to 5 analog or 4 digital sub-micro-sized servos with the BEC on any recommended input voltage.
Brake: Yes
Continuous Maximum Current: 30A
Input Voltage: 3S–4S Li-Po, 9- to 12-cell Ni-MH/Ni-Cd input voltage
Input Connector Types: 16AWG with E-flite EC3 connector
Output Connector Types: 16AWG with 3.5mm Female Gold Bullet Connectors
Momentary Peak Current: 35A
Length: 2.0 in (51mm)
Width: 1.1 in (28mm)
Height: 0.35 in (8.7mm)
Weight: 1.1 oz (31g)
BEC Voltage: 5.5V Switch-mode, 700mA continuous
Part Number: EFLA1030
|
|
|
|
') "E-Flite 30amp ESC w/switch BEC (3S-4S)")