E-Flite Power 90 BL Motor 325Kv

Article number: 006365
Quantity: 1


  • Equivalent to or surpassing the power of a 90-size, 2-stroke, glow engine for sport and scale airplanes weighing 8 to 13 lb (3.6 to 5.9 kg)
  • Ideal for 3D airplanes weighing up to 10 lb (4.5 kg)
  • Ideal for models requiring up to 1800 watts of power
  • High torque, direct drive alternative to inrunner brushless motors
  • External rotor design for better cooling
  • High-quality construction with ball bearings and hardened 6mm steel shaft
  • Includes mount and mounting hardware with two 10mm prop shaft adapters tapped out for 8-32 threads
  • Slotted 14-pole outrunner design

Brushless outrunner motor
Size: Equivalent to or surpassing the power of a 90-size 2-stroke glow engine
Bearings or Bushings: One 6 x 19 x 6mm Bearing, and One 6 x 15 x 5mm Bearing
Wire Gauge: 13
Recommended Prop Range: 16x8 to 18x8
Voltage: 21.6–31.2V
RPM/Volt (Kv): 325Kv
Resistance (Ri): .02 ohms
Idle Current (Io): 2.00A @ 10V
Continuous Current: 50A
Maximum Burst Current: 65A (15 sec.)
Cells: 6S–8S Li-Po or 18–26 Ni-MH/Ni-Cd
Speed Control: 85A High Voltage Brushless
Weight: 450 g (15.8 oz)
Overall Diameter: 56mm (2.20 in)
Shaft Diameter: 6mm (.24 in) (Includes two 10mm threaded prop shaft adapters with 1.5 pitch)
Overall Length: 52mm (2.00 in)

Maximum operating temperature: 220 degrees Fahrenheit. 

Adequate cooling is required for all motor operation at maximum current levels. 

Maximum burst current duration is 15 seconds. Adequate time between maximum burst intervals is required. 

6S–8S Li-Po or 18-26 Ni-MH /Ni-Cd

16x8 to 18x8 electric props

85A High Voltage Brushless ESC

0 stars based on 0 reviews